Found this page helpful? Please like. Wants to help other and spread awareness? Please share

The CORNET ED88TPLUS 5G2 is replaced by the CORNET ED98QPro5G…press here to read more about the newer meter.
The new version is available on our store site – https://www.4ehsbyehs.com/product/cornet-ed88tplus-5g2/

The CORNET ED88TPLUS 5G2 EMF meter is an ‘all in one’ home-use EMF meter with detailed numeric and graphic display. It is a fast RF meter, with ELF magnetic & electric fields. With Peak, Average, Histogram, Freq, Duty cycle, Statistical view, RF Logger and much more…

למזמינים לישראל, יש להזמין מהאתר הישראלי, לחצו כאן

Order from our store site www.4EHSByEHS.com

New version 03-2023 CORNET ED88TPLUS 5G2 (V4)

This meter has been replaced by a news model CORNET ED98QPro5G, more info at –
https://www.norad4u.com/measure/home-use-emf-emr-elf-rf-meters-and-detectors/cornet-ed98qpro5g2/
The new version is available on our store site – https://www.4ehsbyehs.com/product/cornet-ed88tplus-5g2/

Description of the CORNET ED88TPLUS 5G2 EMF meter

All in one, both RF(100MHz-8GHz) and ELF (Magnetic and Electric fields)  with high sampling rate(12500 per half a second), RF Frequency meters (100MHz up to 2.7GHz), adjustable Led bar, adjustable Alarm, and 2 Average mode in RF mode(last 15 seconds and last half a second), Audio Feedback( in RF mode) , max and current measurement functions. New Features: Bigger LCD display, Better plastic structure, Easier to operate, Earphone plug, Micro USB socket for advance users (Monitoring via PC).
Bottom line – A great all in one home meter for those who like to have detailed LCD display with numeric values.

Video Review of the CORNET ED88TPLUS 5G2 EMF meter

New Presentation – https://youtu.be/yjDAA-6QRXM

CORNET ED88TPLUS5G2 – https://youtu.be/yjDAA-6QRXM

Short Presentation and operation – https://youtu.be/uA1Oqip4uy4
Unboxing and Presentation – https://youtu.be/9UQigqsNOfU

Advantages and features

  • New in V4 – Logger view can show RF wave form if time interval is setup to 1mSec.
  • New in V4 – Statistical view can now partially show the RF wave form
  • New in V3 – Duty cycle display in RF mode.
  • New in V3 – Logger view and Statistical view.
  • New in V2 – History Log in RF mode of up to 512 seconds.
  • New in V2 – Sampling rate up to 25000/sec (used to be 10000/sec)
  • New In V2 – Duty Cycle calculation
  • Single Axis RF and ELF meter (most RF sources are in Y axis. ELF sources usually radiate in 2 axis).
  • Both for RF and ELF measurement and source detection
  • Very sensitive RF(down to 0.0005mW/m2) and ELF(0.005uT/0.05mG) modes
  • Very Fast RF meter (most important for an RF meter, 12500 measurements for every half a second and displaying the max level measured in the last half second).
  • RF mode from 100MHz up to 8GHz (from 0.0005mW/m2)
  • ELF Magnetic mode LF600 – from 40 to 10KHz and up to 600mG
  • ELF Magnetic mode LF30 – from 40 to 1000Kz and up to 10mG (very sensitive ELF mode).
  • ELF Electric field mode Efield – from 50Hz to 50000Hz and 2V/m up to 1000V/m
  • RF mode – Audio-sound feedback
  • RF mode – Adjustable audio alarm to levels of 0, -5, -10 ,-15, -20, -25, -30, -35 dBm.
  • RF Led bat – Adjustable sensitivity 
  • RF+ELF M + ELF E modes – Display Max measured value since power up 
  • In RF mode, display Average level over last half a second.or over last 15 seconds.
  • RF measurement in dBm, V/m, mW/m2
  • Improved sensitivity in ELF, shows levels from 0.1 mG and up (0.5 in the ED75)
  • LF600 mode for low frequency from 0.05uT (0.5mG)
  • LF30 mode for low frequency from 0.01uT (0.1mG)
  • ELF measurement in uT, mG.
  • Histogram graph (level/time graph) shows the values measured in the last 15 seconds. Helps you see fast signals and how the radiation levels change over time. Great for RF/ELF source hunting.
  • Improved LCD display
  • Back Led light feature.
  • Led Lightbar that marks the radiation level if you are having a hard time with the numbers). 
  • 9V battery
  • Battery strength indication
  • Earphone socket
  • Improve power switch
  • Improvement of the CORNET ED88T
  • LFE M, ELF E and RF in the same meter
  • 90 days money-back guarantee
  • 1 year warranty

Disadvantages

One axis only (if you want to track the source this is an advantage).Short battery life (about 3 hours with back-light)At first, some people can find it hard to follow all the info on the LCD (but it also has a led light bar to make it easier at first).

Recording your RF measurement on a PC

The CORNET ED88TPLUS supports a connection to a PC and recording of the RF measurement. This feature is usually available in highend meters. but now available also on the CORNET ED88TPLUS. In order to operate this feature, you need to connect the meter to the PC via MICRO USB cable (recommended directly to the PC and not via USB Hubs), install the drivers(on USB to UART mode), install and run the software. 

PC Drivers for CORNET ED88T PLUS
Monitoring software from envirosense 

Bottom line:

The CORNET ED88TPLUS 5G2 is highly recommended, BEST for it’s price, all in one, home use, EMF meter for those who like to have a detailed LCD display with numeric values. 

Manufacture’s data sheet

FEATURES
Operation mode: Tri-mode of operation
                     – (RF mode):                High frequency RF Broadband
                     – (Gauss mode):           Low frequency Magnetic field
                     – (Electric Field mode): Low frequency Electric field
Frequency range & sensitivity: 
                     – RF mode:       100MHz to 8.0GHz,
                                              -65dBm to +5dBm, 8mv/m-26v/m,  0.18uw/m-sq to 1.8 w/m-sq
                     – Gauss mode:  (1)50Hz to 10KHz,  (0.1uT to 50uT)/ (1mG to 500mG)
                                              (2)50Hz to 1KHz,    (0.01uT to 1uT)/ (0.1mG to 10mG)
                     – Electric field mode: 50Hz – 10KHz  (10v/m to 1000v/m)
Frequency Display:  Build-in  100MHz to 2.7GHz  Frequency counterSignal :           Analog RF(AM/FM) and high speed digital burst RF, GSM,TDMA,CDMA,PCS,
                      Wi-Fi 2.4GH,5.8GHz,WiFi6, WiFi6e, 3 – 6GHz Ultra-Wide-band, 3G, 4G and
                      5G (sub-6GHz band 400MHz-6GHz),
                      AC smart meter. AC high voltage power line, Transformer, Motor, Appliance EMF.
Display mode:  dBm, mW/m2, V/m, uT, mGauss, MHz
Display: Graphics LCD  multi-digit power level display, moving  Histogram, level  bar display,
              color LED segment. 
Function:   RF power level, LF magnetic field strength, Electric Field  strength, signal frequency,
                  Hold, MAX, Peak Average, Average, Sound output, audio Alarm, custom LED level, Duty cycle

Order from our store site www.4EHSByEHS.com

For other meters and recommendations please see – EMF Meters