Comments on: Questions & Answers https://www.norad4u.com/question-answers/ No Radiation For You - EMF/EMR/EHS info site Sun, 25 May 2025 11:03:25 +0000 hourly 1 https://wordpress.org/?v=6.9.4 By: Amir Borenstein https://www.norad4u.com/question-answers/#comment-14 Mon, 04 May 2020 17:47:00 +0000 https://norad4u.wordpress.com/?page_id=175#comment-14 In reply to Jim.

Yes, the right way to go is reduce exposure and use by going wired.
Please see our guide for EMF reduction – https://www.norad4u.com/guides/no-rads-step-by-step-guide-for-emf-initial-exposure-reduction/
and for handling EHS – https://www.norad4u.com/ehs/handling-ehs/
All the best
amirb

]]> By: Jim https://www.norad4u.com/question-answers/#comment-13 Tue, 14 Apr 2020 07:39:13 +0000 https://norad4u.wordpress.com/?page_id=175#comment-13 Hi
To resolve 3G 4G 5G and future wire less tech please consider this.
Hard wired systems at home and work. Incorporating appropriate safe flexible leads from plug in points to enable all devices to be hard wired without wi fi.
Between home and work a return to internet cafes or other suitable domains for access to the internet. without wi fi using the same plug in facility as I described for home and / or work.
In remote locations an adapted larger kiosk could be sited.
This may be an issue for GPS but we did survive without it, but in saying that routes could be down loaded before.
To protect our home planet but still use advanced technology this I feel should be seriously looked into.
Many shops are empty so this could benefit those areas throughout the country.
Too many scientists whom are independent are quoting the dangers so something must be done to resolve this.

]]> By: Amir Borenstein https://www.norad4u.com/question-answers/#comment-3 Wed, 29 Jan 2020 09:01:04 +0000 https://norad4u.wordpress.com/?page_id=175#comment-3 In reply to Haim.

I contacted this person and ask for a photo of the measurement.
He then replied that during taking the photo, he found out that the printer was emitting the RF radiation.
He is now switching to work with a printer that has no WIFI or that it can be turned completely OFF.

]]> By: Haim https://www.norad4u.com/question-answers/#comment-2 Wed, 15 Jan 2020 17:49:39 +0000 https://norad4u.wordpress.com/?page_id=175#comment-2 I have 3 computers and 1 printer/fax at home on a Bezek router N600. I turned off the WIFI option on the router, and also had Bezek cancel the option, but it still emits around 1mw/m2 at distance of 1 meter. Is there an alternative set up I can install without a Wireless router, using standard modem , print server etc.?)

]]>